Released in October 2005, our panel designed to meet all the requirements of EN50131-3 and suitable for use in systems designed to comply with PD6662:2004 at Grades 2 and 3.

The Castle Care-Tech range of intruder detection control systems is designed for the smallest domestic home right through to the largest commercial applications, all through the use of the G2 iD panel which can be upgraded with 'snap-in' MSX cards to expand system capabilities all the way to 256 zones, 14 independant areas, up to 30 setting points and suitable for use in Grade 3 systems.

Zones		16 (Click here for Zone Map)
Keypads		Max 4
Tag Readers		Max 3
Access Control Points		0 - Requires MSX card
Partitions		4 levels
Wards		-
Shunts		-
Codes		12 (+10 Duress/Guard)
Programmable Outputs		12 to 39 + Speaker
Output Modules		1
ZEMs		1 (8 zone ZEM or Radio)
Logs		750
EN Grade		2

Click here to view the full G2 iD Spec Sheet and compare the range.

Zones 44 (Click here for Zone Map) Keypads Max 8 Tag Readers Max 7 Access Control Points Max 7 = Total Not to Exceed 8 devices Partitions 4 areas or 4 levels Wards Max 7 Shunts Max 16 Codes 50 (+20 Duress/Guard) Programmable Outputs 12 to 63 + Speaker Output Modules 2 ZEMs 1 (8 zone ZEM or Radio) Logs 2000 EN Grade 3 Click here to view the full G2 iD Spec Sheet and compare the range. Zones 134 (Click here for Zone Map) Keypads Max 16 Tag Readers Max 16 Access Control Points Max 29 = Total Not to Exceed 30 devices Partitions 8 areas or 8 levels Wards Max 29 Shunts Max 64 Codes 230 (+20 Duress/Guard) Programmable Outputs 12 to 211 + Speaker Output Modules 8 ZEMs 3 (30 iD zone ZEM or Radio) Logs 2000 EN Grade 3 Click here to view the full G2 iD Spec Sheet and compare the range. Zones 256 (Click here for Zone Map) Keypads Max 16 Tag Readers Max 16 Access Control Points Max 29 = Total Not to Exceed 30 devices Partitions 14 areas or 14 levels Wards Max 29 Shunts Max 128 Codes 500 (+20 Duress/Guard) Programmable Outputs 12 to 227 + Speaker Output Modules 8 ZEMs 7 (30iD zone ZEM or Radio) Logs 2500 EN Grade 3 Click here to view the full G2 iD Spec Sheet and compare the range.

OUTPUT CAPABILITIES
Hold Off:		650 mA (continuous) Max 800 mA in alarm
Outputs 1 & 2:		800 mA
Output 3:		100 mA
Loudspeaker		Max load 8 ohms Suitable for 1x8 ohm or 2x16 ohm speakers
'STU' Pins		1 mA
12v outlets		800 mA 300mA on ZEM
ELECTRICAL SPECIFICATIONS
Mains Supply:		230v (220-240v) AC Max 250mA
Power Supply:		13.75v DC 1.5 Amp (1A continuous)
Battery:		17Ah
Fuses:
Battery:		3.15A Quick Blow
12v outlets:		800mA Quick Blow